Support Win XP, Win CE, Liunux, Win 2K, win 7 win8 win8.1, win10, An/dro/id, OS
need to install drivers before communication.
Most of the OS can install the drivers automatically, standard packing no CE
Package:1 X 1.8m USB to RJ11/RJ12 Serial cord for PLC
Driver Download: https://www.ftdichip.com/Drivers/VCP.htm
Installation Guide: http://www.ftdichip.com/Support/Documents/InstallGuides.htm
DB9 to RJ11/RJ12 6P6C Serial cord without chip
DB9 to RJ11/RJ12 6P6C Serial cord without chip
Length:1.8m
Buyer Reader
Drivers are available which allow F&T>D*I devices to work with the following operating systems:
About FT232RL
The FT232R is the latest device to be added to FTDI?s range of USB UART interface Integrated Circuit Devices. The FT232R is a USB to serial UART interface with optional clock generator output, and the FTDIChip-ID? security dongle feature. In addition, asynchronous and synchronous bit bang interface modes are available. USB to serial designs using the FT232R have been further simplified by fully integrating the external EEPROM, clock circuit and USB resistors onto the device.
The FT232R adds two functions compared with its predecessors, effectively making it a "3-in-1" chip for some application areas. The internally generated clock (6MHz, 12MHz, 24MHz, and 48MHz) can be brought out of the device and used to drive a microcontroller or external logic. A number (the FTDIChip-ID?) is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle which can be used to customer application software from being copied.
Single chip USB to asynchronous serial data transfer interface.
Entire USB protocol handled on the chip - No USB-specific firmware programming required.
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.
Fully assisted hardware or X-On / X-Off software handshaking.
Data transfer rates from 300 baud to 3 Megabaud (RS422 / RS485 and at TTL levels) and 300 baud to 1 Megabaud (RS232).
In-built support for event characters and line break condition.
USB FTDIChip-ID? feature.
configurable CBUS I/O pins.
Auto transmit buffer control for RS485 applications.
Transmit and receive drive signals.
48MHz, 24MHz,12MHz, and 6MHz clock output sig/nal Options for driving external MCU or FPGA.
FIFO receive and transmit buffers for high data throughput.
256 Byte receive buffer and 128 Byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
Adjustable receive buffer timeout.
Synchronous and asynchronous bit bang interface options with RD# and WR# strobes.
CBUS bit bang option.
Integrated 1024 bit internal EEPROM for I/O configuration and storing USB VID, PID, serial number and product description strings.
Device supplied preprogrammed with USB serial number.
Support for USB suspend / resume.
Support for bus powered, self powered, and high-power bus powered USB configurations.
Integrated 3.3V level converter for USB I/O .
Integrated level converter on UART and CBUS for interfacing to 5V - 1.8V Logic.
True 5V / 3.3V / 2.8V / 1.8V CMOS drive output and TTL input.
High I/O pin output drive option.
Integrated USB resistors.
Integrated power-on-reset circuit.
Fully integrated clock - no external crystal, oscillator, or resonator required.
Fully integrated AVCC supply filtering - No separate AVCC pin and no external R-C filter required.
UART sig/nal inversion option.
USB bulk transfer .
3.3V to 5.25V Single Supply Operation.
Low operating and USB suspend current.
Low USB bandwidth consumption.
UHCI / OHCI / EHCI host controller compatible.
USB 2.0 Full Speed compatible.
-40degC to 85degC extended operating temperature range
Drivers are available which allow F&T>D*I devices to work with the following operating systems:
8.1
8.1 x64
8
8 x64
Server2012
Server 2008 R2
7
7 x64
Server 2008
Server 2008 x64
Vista
Vista x64
Server 2003
Server 2003 x64
XP
XP x64
ME
98
Linux
OS X
OS 9
OS 8
CE.NET (Version 4.2 and greater)
An/dro/id
RT
Support for WinCE7.0
Initial functional testing conducted by F&T>D*I has shown that the F&T>D*I drivers function as expected on CE 7.0
Support for older versions of Desktop
NOTE: have ended support for certifying XP and VISTA through their WHCK test program. As such current builds will still work on XP and VISTA but are not certified.
Differences in Driver API
For most of these operating systems two types of driver are available: Virtual COM Port (VCP) drivers and direct (D2XX) drivers. The VCP driver emulates a standard PC serial port such that the USB device may be communicated with as a standard RS232 device. The D2XX driver allows direct access to a USB device via a DLL interface.
To locate the drivers you want to install for a device, select which of the driver types you wish to use (VCP or D2XX) and then locate the appropriate operating systems. With the exception of 98 and ME, all devices are supported in each driver package.
If a VCP driver is required for An/dro/id please refer to the following application note: TN 132 Adding F&T>D*I Devices VCP Driver Support to An/dro/id
aeProduct.
TY>pe : Serial cord
Chip : F&T>D*I
Serial : RS232
Connector : USB to RJ11/RJ12
APPLICATON :
Purpose : plc to pc communication cord
feature 01 : cord
feature 02 : usb cord for
feature 03 : usb rs232
feature 04 : PLC cord