HME TRAIL CAMERA HOLDER POST: Wing nut for easy vertical adjustment The HME Products Trail Camera Holder Post will allow the user to place their trail camera anywhere. This will enable the user to strategically place their trail camera on the frequently used trails or food plots when there are no trees available or over a scrape at the perfect distance. This simple, compact, and sturdy design easily steps into the ground providing a dependable means for supporting all trail cameras with a 1/4 by 20 thread insert on the bottom. Once the trail camera is installed onto the threaded end of the camera mount, rotate into the desired position and lock with a rubber washer and wing nut. Continue by loosening the 3/8 wing nut of the vertical adjustment pivot the camera into position and re-tighten the wing nut. Would also work great in a ground blind or for any outdoor activity when videotaping. MAIN FEATURES: - Easy step-in design with dual prong prevents twisting; - Lightweight design; - 1/4" by 20mm thread to accommodate most cameras on the market; - Wing nut for easy vertical adjustment.
The HME Products Trail Camera Holder Post will allow the user to place their trail camera anywhere. This will enable the user to strategically place their trail camera on the frequently used trails or food plots when there are no trees available or over a scrape at the perfect distance. This simple, compact and sturdy design easily steps into the ground providing a dependable means for supporting all trail cameras with a 1/4" by 20 thread insert on the bottom. Once trail camera is installed onto the threaded end of the camera mount, rotate into the desired position and lock with rubber washer and wing nut. Continue by loosening the 3/8" wing nut of the vertical adjustment and pivot the camera into position and re-tighten wing nut. Would also work great in a ground blind or for any outdoor activity when video taping.