Olivechard InCell LCD Screen Replacement for iPhone 16 Plus 6.7"

This replacement screen assembly is designed for iPhone 16 Plus front display repair.

It is an aftermarket InCell LCD display assembly with touch screen digitizer and proximity sensor flex cable, intended for repairing cracked glass, black screen, display lines, dead pixels, flickering, ghost touch, or touch response failure.

This is a practical repair part for buyers who want to restore normal display and touch function at a more affordable repair cost than higher-grade OLED replacement options.

📱 Compatible Model Family

Compatible model family includes A3290, A3082, A3289, and A3291.

Please confirm your exact model before purchase. This screen is designed for iPhone 16 Plus 6.7-inch only and is not for iPhone 16, iPhone 16 Pro, or iPhone 16 Pro Max.

✨ Best Fit Buyer Scenario

This screen is suitable for personal phone repair, repair shops, refurbishing work, backup phone recovery, data access, and resale preparation where the damaged phone needs display and touch function restored.

It is especially useful for repair situations such as cracked front glass, black display, display lines, dead pixels, touch delay, ghost touch, or a screen that no longer responds after drops or pressure damage.

🔍 InCell LCD vs Factory OLED Difference

The factory iPhone 16 Plus display uses Super Retina XDR OLED technology.

This replacement uses InCell LCD material for repair use.

Compared with the factory OLED display, buyers may notice:

less deep black performance
different contrast and color saturation
different brightness balance
different refresh and motion feel
possible thicker panel structure
possible higher power use under similar brightness
display quality that is not identical to the factory screen

This InCell LCD version is better suited for practical repair and daily phone recovery, not for buyers expecting the exact same display experience as the factory OLED screen.

📦 Proximity Sensor Flex Cable Notice

This screen assembly includes the proximity sensor flex cable to reduce upper small-part transfer work during repair.

Face ID, front camera, and TrueDepth-related functions depend on the phone's original components, connector condition, and correct installation. This screen does not repair damaged Face ID hardware or motherboard-level faults.

Do not scratch, wipe aggressively, bend, or damage the original front camera / TrueDepth area during repair.

🧰 Package Contents

Package includes:

1 x InCell LCD screen assembly for iPhone 16 Plus
1 x proximity sensor flex cable included on assembly
1 x repair tool kit
screwdriver set
tweezers
pry bar / opening tools
waterproof adhesive seal
screen protector
SIM card pin
double-sided tape
opening card

Tool contents may vary slightly by batch. The included tools are basic repair assistance tools; professional tools may still be needed depending on the repair condition.

The clear protective films on the front or back may show light marks or dust from handling and inspection. Keep the films on during testing and remove them only after confirming the screen works properly.

🔌 Installation and Testing Notes

Before final installation:

power off the phone completely
disconnect the battery flex cable from the motherboard
connect the replacement screen for testing first
verify display output
test touch response across the full screen
check brightness and color behavior
test proximity sensor behavior
confirm Face ID-related original components still work if needed
complete final sealing only after all functions are confirmed

Do not remove protective films, press hard on the panel, bend the flex cable sharply, or complete adhesive bonding before testing is passed.

Professional installation is strongly recommended for buyers without screen repair experience.

💬 Support and Return Reminder

Please inspect and test the screen before final installation. If display, touch, sensor behavior, or connector issues appear during pre-install testing, stop installation and contact support with clear photos or video before sealing the phone.

Installation damage, torn flex cables, pressure marks, connector damage, wrong model selection, or sealing the phone after failed testing are not considered product defects.

FAQ

Q: Is this the same as the factory OLED screen?
A: No. This is an aftermarket InCell LCD replacement. It restores display and touch function, but brightness, black depth, contrast, refresh feel, power use, and display quality may differ from the factory OLED screen.

Q: Does this include the touch screen digitizer?
A: Yes. This is a display assembly with touch screen digitizer for repairing both image output and touch response issues.

Q: Does this include the proximity sensor flex cable?
A: Yes. The proximity sensor flex cable is included to reduce upper small-part transfer work during installation.

Q: Will Face ID still work after replacement?
A: Face ID depends on the phone's original TrueDepth and front camera components. This screen does not repair damaged Face ID hardware. Keep original components intact and test before final sealing.

Q: Why should I test before final installation?
A: Testing helps confirm display, touch, and sensor behavior before adhesive bonding. It reduces rework risk if a connector is not seated correctly or if the wrong model was ordered.

Q: Is this a good choice for display-quality-sensitive buyers?
A: It is better for cost-focused repair and daily recovery. Buyers who require factory-level OLED brightness, black depth, and motion feel should consider a higher-grade OLED replacement option.