1. [FLEXIBLE CHARGING SETTINGS] Adjust the start and stop voltage and automatically cut off the power to save power and extend battery life.
2. [PREMIUM DISPLAY] Bright 3-digit display with 0.1 accuracy for easy setting values.
3. [REAL TIME PROTECTION] Start/stop based on set values, voltage to avoid overload. 300V/20A and meets various wiring requirements
5. [VERSATILE COMPATIBILITY] Ideal for 220V chargers, supports 12V to 96V batteries

Data Techniques:
Features:
Charging start voltage and charging stop voltage can be adjusted freely, the power is automatically cut off to save energy and extend battery life.
The board has a bright 3-digit display with 0.1 accuracy that shows the setting value.
Start or stop according to the set value and monitor the voltage in real time to effectively protect against overload.
Large capacity terminals can meet many wiring requirements, maximum voltage 300V, current 20A.
Suitable for 220V chargers and control the charge of 12V, 24V, 36V, 48V, 60V, 72V, 84V, 96V, etc.

Data Techniques:
Input Voltage: AC 220V
Display Accuracy: 0.1V
Control Accuracy: 0.1V
Output Type: Switch
Voltage Error: ±0.1V
Size: 86*58*24mm
Instructions:
Restore factory settings:
Press the Start and Stop buttons and the screen showing 888 simultaneously to Reset. Restore factory settings.
Common battery charging voltage (for reference only):
Charging Voltage Charging Voltage Charging Voltage
6V 6V ~ 7.2V 36V 36V ~ 46.8V
12V 12V ~ 14.4V 48V 48V ~ 57.6V
24V 24V ~ 28.8V 72V 72V~86.4V The charging voltage generally not higher than 1.2 times the battery voltage. For example, if the battery voltage is 6V, the charging voltage is between 6V and 7.2V. The charging current should preferably not exceed 1/10 of the battery capacity. preferred.. Charging voltage = battery voltage x 1.2; max. charging current = battery current x 0.1
Note:
1, the default starting voltage is 12V and the default shutdown voltage is 14V. When adjusting the voltage, if one voltage value cannot be changed, you can first set the other voltage value, and then adjust this voltage value.
2: Adjust the charging starting voltage according to the voltage of the tested battery when it needs to be charged (self-tested with a voltmeter), and adjust the charging stop voltage according to the voltage of the tested battery when fully charged (self-tested with a voltmeter). ).
What you get:
1 x protective panel