Motorized Outdoor HDTV Antenna with 22dB Amplifier – 360° Rotation – 1080P / 4K Ready This outdoor motorized TV antenna receives free over-the-air digital HD channels including major networks in UHF and VHF bands. The built-in low-noise amplifier provides 22dB gain to improve reception of distant or marginal signals, while the motorized rotor allows you to aim the antenna from inside the house using the included remote control box. Specifications: Type: Outdoor Yagi/Log-periodic hybrid with rotor Frequency: VHF 40-230MHz / UHF 470-862MHz Gain: 22dB (amplified) Rotation: 360° motorized (wired rotor controller included) Output: F-type female connector Power: AC adapter for rotor + amplifier (included) Cable: RG6 coaxial recommended (check package contents) Features: Motorized full-circle rotation — fine-tune aim without going outside Built-in amplifier boosts weak signals for fringe-area reception Weather-sealed housing resists rain, ice, UV Supports 720p / 1080p / 4K ATSC where broadcast Includes rotor control box, mounting hardware, and power supply Installation: Mount antenna on pole (1-1.5" OD recommended) or eave using supplied U-bolts. Run RG6 coax from antenna to TV's ANT IN port. Connect rotor control wire and power both rotor box and amplifier. Turn on TV, perform Channel Scan (not "Auto Program" if separate). Use rotor remote to slowly rotate while re-scanning to find optimum direction. Important: Reception range depends on terrain, tower distance, and local obstructions — no antenna "guarantees" a specific channel count. If local signals are very strong, amplifier may be switched off or bypassed to prevent overload. This is an aftermarket consumer antenna. Brand names referenced only for compatibility context.