بحث

بحث

بيت / ALMOCN / أجهزة الكمبيوتر ذات اللوحة الواحدة
1 Set PN532 V2.0 RFID NFC Wireless Module PCB Attenna I2C IIC SPI HSU Type C Interface with IC S50 Card Key Card for Arduino DIY Smart Phone Android Phone in Saudi Arabia 1 Set PN532 V2.0 RFID NFC Wireless Module PCB Attenna I2C IIC SPI HSU Type C Interface with IC S50 Card Key Card for Arduino DIY Smart Phone Android Phone in Saudi Arabia 1 Set PN532 V2.0 RFID NFC Wireless Module PCB Attenna I2C IIC SPI HSU Type C Interface with IC S50 Card Key Card for Arduino DIY Smart Phone Android Phone in Saudi Arabia 1 Set PN532 V2.0 RFID NFC Wireless Module PCB Attenna I2C IIC SPI HSU Type C Interface with IC S50 Card Key Card for Arduino DIY Smart Phone Android Phone in Saudi Arabia 1 Set PN532 V2.0 RFID NFC Wireless Module PCB Attenna I2C IIC SPI HSU Type C Interface with IC S50 Card Key Card for Arduino DIY Smart Phone Android Phone in Saudi Arabia 1 Set PN532 V2.0 RFID NFC Wireless Module PCB Attenna I2C IIC SPI HSU Type C Interface with IC S50 Card Key Card for Arduino DIY Smart Phone Android Phone in Saudi Arabia

1 Set PN532 V2.0 RFID NFC Wireless Module PCB Attenna I2C IIC SPI HSU Type C Interface with IC S50 Card Key Card for Arduino DIY Smart Phone Android Phone

SAR 68
الاجهزه الالكترونيات الامريكية قد تحتاج الى محمول فولت من ١١٠ الى ٢٢٠. قد تحتاج إلى محول كهرباء
– 1 +

مميزات خاصة

  • Supply Voltage: 3.3V to 5.5 V; Model Number: NFC Card Reader Module; Type C Interface
  • Based on PN532 Chip: Built with the PN532 chip, this near field communication reader ensures reliable and efficient 13.56MHz NFC communication.
  • It features an onboard antenna, eliminating the need for external antenna coils. The module is compatible with SPI, I2C, and UART interfaces for seamless communication.
  • Support SPI, I2C and UART interface selection switching.
  • Support for cards: IC access card, IC lift card, electric car NFC card

وصف

Feature:
1. Based on PN532 chip for 13.56MHz near field communication.
2. The module is equipped with an on-board antenna, no external antenna coil is required,
and the module is compatible with SPI, I2C, and UART interfaces for communication.
3. With the NFC library supporting Arduino and Raspberry Pi, it can be easily used
for the development of NFC-enabled products.
4. Support SPI, I2C and UART interface selection switching.
5. Effective communication distance within 5cm.
6. Can be used for 13.56MHz contactless communication.
7. Compatible with ISO14443 Type A and Type B standards.

Specification:
Supply Voltage: 3.3V to 5.5 V
Operating Voltage: 3.3V
Maximum working current: 150mA
Operating current (standby mode): 100mA
Operating current (card writing mode): 120mA
Operating current (card reading mode): 120mA

Package include:
1 x PN532 NFC Card Reader Module

منتجات شبيهه

{"error":"\u062e\u0637\u0623","cart_limit":"\u0644\u062f\u064a\u0643 \u0627\u0644\u0643\u062b\u064a\u0631 \u0645\u0646 \u0627\u0644\u0645\u0646\u062a\u062c\u0627\u062a \u0641\u064a \u0633\u0644\u0629 \u0627\u0644\u062a\u0633\u0648\u0642 \u0627\u0644\u062e\u0627\u0635\u0629 \u0628\u0643.","prod_limit":"\u0644\u0627 \u064a\u0645\u0643\u0646\u0643 \u0625\u0636\u0627\u0641\u0629 \u0627\u0644\u0645\u0632\u064a\u062f \u0645\u0646 \u0647\u0630\u0627 \u0627\u0644\u0645\u0646\u062a\u062c"}