【MULTI-PURPOSE 2-WAY COAX SPLITTER】 NEWCARE nickel-plated 2-way coax splitter divides a single signal into two outputs. Optimized for satellite and MoCA frequency ranges, suitable for antennas, cameras, amplifiers and other coaxial devices. Compatible with RG59 and RG6 coaxial cables.
【CAREFUL PREMIUM CONSTRUCTION】This coax splitter 2 way box is made of nickel-plated zinc press box, with better weather resistance, rust resistance, stability. The sealed housing increases waterproof protection, and the electronic component inside the device receives the internal pressure of 15 psi. Suitable for indoor, outdoor, wet / dry environments.
【LOW SIGNAL LOSS】The frequency range of this moca splitter supports up to 5-2400MHz (2.4GHz), and internal circuit board for better reliability/durability. High shielding structure with low insertion loss, high return loss and isolation for better performance on TV, satellite and all other devices' signal. Between 1750 and 2400MHz there is low signal loss of only 4.5db on each output port improving performance and speeds.
【INSTALLATION STEPS】①Prepare the coaxial cable and F-type male connector②Strip the coaxial cable③Connect the coaxial cable to F-type male connector④Connect the coaxial cable to the coaxial splitter. In order to make your satellite connection balance and easier, all coaxial ports of the dispenser are power passing. (NOTE: ONLY One Highest Voltage is Allowed to Pass At A Time)
【WHAT YOU GET】1x Coaxial Splitter, 1x Screws. High-quality metal material makes the product last longer, and attention to detail is designed to provide a better using experience.
Satellite TV uses higher frequency bands than cable TV, and this splitter is designed primarily for satellite and MoCA frequency ranges rather than all cable TV systems.