بحث

بحث

بيت / SpeedyFiberTX / هوائيات الشبكة وأجهزة الإرسال والاستقبال
SpeedyFiber 1-Pack 10GBASE-T SFP+ RJ45 جهاز إرسال واستقبال نحاسي، متعدد المعدلات، شرائح Broadcom، 80m Cat6a/7، متوافق مع Cisco Catalyst، Arista، Ubiquiti، MikroTik، Netgear، TP-Link، D-Link والمزيد in Saudi Arabia

SpeedyFiber 1-Pack 10GBASE-T SFP+ RJ45 جهاز إرسال واستقبال نحاسي، متعدد المعدلات، شرائح Broadcom، 80 متر Cat6a/7، متوافق مع Cisco Catalyst، Arista، Ubiquiti، MikroTik، Netgear، TP-Link، D-Link والمزيد 2

SAR 261
كمية حزمة العنصر2
الاجهزه الالكترونيات الامريكية قد تحتاج الى محمول فولت من ١١٠ الى ٢٢٠. قد تحتاج إلى محول كهرباء
– 1 +

مميزات خاصة

  • [COOLER RUNNING, LOWER POWER CONSUMPTION] Powered by Broadcom BCM84891 chipset rated at 1.6W at 10Gbps/30m and 2.0W at 10Gbps/80m — delivering up to 35% lower power consumption and a reduced thermal footprint compared to traditional 2.5W copper transceivers, helping minimize heat build-up for stable, always-on 10G copper networking.
  • [BROAD COMPATIBILITY ACROSS MAJOR SWITCH BRANDS] Tested compatible with Cisco Catalyst (2960-X, 3560CX, 3750X, 4500, 9300, 9500), Arista, Juniper QFX5100, HPE, Huawei, Dell, H3C, Mellanox, Ubiquiti UniFi, MikroTik, Netgear, TP-Link, D-Link, Zyxel, Supermicro and most open switches and NAS systems.
  • [BROADCOM CHIP FOR STABLE MULTI-GIG PERFORMANCE] Powered by Broadcom BCM84891 to deliver reliable multi-gig copper Ethernet performance. DAC-coded EEPROM ensures broad platform recognition across Cisco Catalyst and most open-platform switches.
  • [MULTI-RATE WITH CONDITIONS] Supports 100M/1G/2.5G/5G/10GBase-T auto-negotiation. When installed in a 10G host port, line side auto-negotiates at 10G/5G/2.5G. When installed in a 1G host port, line side supports 1G/100M only. Please ensure your switch port speed matches your intended use.
  • [UP TO 80M OVER CAT6A/CAT7] Supports 10GBASE-T up to 80m over Cat6a/Cat7; 5G/2.5G/1G/100M up to 100m over Cat5e. Hot-pluggable, plug-and-play. Compliant with IEEE 802.3az, SFF-8431/8432 MSA, RoHS 2.0, CE, FCC. Commercial grade: 0°C to 70°C.

وصف

SpeedyFiberTX 10GBASE-T SFP+ RJ45 Copper Transceiver delivers reliable Multi-Rate Ethernet (100M / 1G / 2.5G / 5G / 10G) over standard RJ45 copper cabling, with actual speed depending on host port capability. Compatible with Cisco SFP-10G-T-S and built on a Broadcom BCM84891L solution, it also supports selected platforms from Ubiquiti, MikroTik, Netgear, TP-Link, D-Link, Zyxel, and most NAS systems with SFP+ slots. With up to 80 meters reach at 10Gbps over Cat6a/Cat7, this module is ideal for switches, routers, firewalls, servers, and network adapters. Its cooler running, lower power design (1.6W @ 30m / 2.0W @ 80m) helps reduce heat build-up for stable, always-on operation.

KEY SPECS
Compatible with Cisco SFP-10G-T-S
Broadcom BCM84891L chipset
Multi-Rate: 10G / 5G / 2.5G on 10G host ports; 1G / 100M on 1G host ports (auto-negotiation)
Up to 80m at 10G over Cat6a / Cat7
Low Power: 1.6W @ 30m / 2.0W @ 80m
Hot-Swappable SFP+ form factor
Operating Temp: 0°C to 70°C
Standards: SFF-8431 / SFF-8432 / IEEE 802.3az
Compliance: RoHS 2.0 / REACH / CE / FCC

منتجات شبيهه

{"error":"\u062e\u0637\u0623","cart_limit":"\u0644\u062f\u064a\u0643 \u0627\u0644\u0643\u062b\u064a\u0631 \u0645\u0646 \u0627\u0644\u0645\u0646\u062a\u062c\u0627\u062a \u0641\u064a \u0633\u0644\u0629 \u0627\u0644\u062a\u0633\u0648\u0642 \u0627\u0644\u062e\u0627\u0635\u0629 \u0628\u0643.","prod_limit":"\u0644\u0627 \u064a\u0645\u0643\u0646\u0643 \u0625\u0636\u0627\u0641\u0629 \u0627\u0644\u0645\u0632\u064a\u062f \u0645\u0646 \u0647\u0630\u0627 \u0627\u0644\u0645\u0646\u062a\u062c"}