Description

1.Adds one RS-232 serial port by connecting to USB.

2. Special high gloss white finish enclosure design.

3.Enhanced RS232 transceiver gives serial port speed of up to 1MBaud.

4. Integral 2m (UT232R-200) USB cable with moulded strain relief.

5. Easy plug & play installation and RS-232 device connection.

6. Works with USB 1.1 & 2.0 Host and Hub ports.

7.Industry Standard FT232R chip set & device drivers for maximum compatibility.

8.Microsoft Windows WHQL-certified, Mac, Linux and Android device drivers.

9.Installs as a standard Windows COM port.

10. COM port number can be changed to any available COM port number,
including COM1 to COM4, to support HyperTerminal, or any other serial
communications software application running in Windows

11. FIFO: 128 byte transmit buffer, 256 byte receive buffer

12. RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND

13. Powered by USB port. No external power adapter required.

14.Serial Communication Parameters.

15.Parity: None, Even, Odd.

16. Data bits: 7, 8

17. Flow control: RTS/CTS, DSR/DTR, X-ON/X-OFF, None

18. Stop bits 1,2

19.Operating temperature of -20°C to +80°C

The FT232R is supplied with its internal EEPROM pre-programmed with a serial number which is unique to each individual device. This, in most cases, will remove the need to program the device EEPROM. "The device operating supply current has been further reduced to 15mA,and the suspend current has been reduced to around 70μA. This allows greater margin for peripheral designs to meet the USB suspend current limit of 500μA." The sense of each of the eight UART signals can be individually inverted by setting options in the internal EEPROM. Thus, CTS# (active low) can be
changed to CTS (active high), or TXD can be changed to TXD#.