Details
Standard Connector: It is suitable for a wide range of photographic equipment such as LED panel lights, spotlights, and flashes. It is also replaceable for more lamps.

Sturdy Pulley: It can keep the rest wire in order, keep the wire moving smoothly, and support the wire as it pulls on your lamp.

Application
The product is suitable for aerial suspension of lighting fixtures in studios, stages, live studios, movies, TV, and photography.

How to Install:
1. Drill holes in the ceiling according to the pre-drilled holes on the base plate.
2. Remove the nuts and insert the bolts into the punched holes.
3. Fix the bolts and tighten the nuts to install the base plate.
4. Install the wire-fixing clip.
5. Insert the press-type safety device into the base by pressing it by hand and fixing it with bolts.
6. Press and hold the press-type safety head to connect the switch head.
7. By pressing the key at the end of the precise shaft core, it can be pulled to a suitable position.

Specifications
Color: Black
Material: Aluminum, Iron, ABS
Process: Spraying Plastics
Load Bearing Capacity: 10kg/22lbs
Steel Wire Diameter: 2mm/0.079in
Mount Type: Ceiling Mounted
Assembly Required: No
Product Height: 55-200cm/21.7-78.7in
Base Size: 12.8*8.8cm/5*3.5in
Packaging Size: 40*37*11.5cm/15.75*14.57*4.53in
Gross Weight: 5kg/11lbs
Net Weight: 4kg/8.82lbs

Package Included
1*Photography Ceiling Rail
Other Needed Accessories

Notes
1.Please check the size carefully before ordering.
2.Please note that lights are not included.
3.It is normal that the expansion screw will blow up after the force is applied.
4.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.