With Brinno BCC2000 Plus + ASP1000-P Construction Camera and Solar Panel Kit Bundle, you can harness the sun's energy to power your Brinno BCC2000 Plus 4-Pack Construction Camera Bundle to help secure your job sites when the crew goes home for the night. The Brinno BCC2000 Plus includes a Professional Time-lapse Camera, access to command and control computer platform (Windows 64-bit OS), a 32-ft camera extender, IPX5 waterproof housing, and a stainless steel mounting clamp. The Brinno ASP1000-P includes a Type C USB Solar Panel, the APB1000 Rechargeable Battery Kit, a universal joint, a clamp mount plate, and mounting hardware including 4 wood screws, 3 wall anchors, velcro loop, and machine screws (one L and three S). The ASP1000 solar panel for security cameras and time lapse cameras connects to the rechargeable battery kit, letting you run your cameras off of the sunlight and is 8.4” x 10.3” x 0.8” and 23.2 ounces. The panel contains a 10W power source and 5V 1A output voltage, with a weather rating of IP65. The APB1000 Rechargeable Battery Kit is specially designed to extend the battery life of time lapse cameras and loT devices. The always-on function provides continual power supply to expand the battery life period of your Brinno camera. It eliminates your concerns of sudden suspension when the camera is recorded under extremely low power status. It is operable under the ambient temperature range from -20 degrees Celsius to 60 degrees Celsius. The output voltage and current is 5V/ 2A total for the two outputs. Energy capacity: 13,800 mAh / 49.6 Wh. Built-in short circuit protection when over charge, over discharge, over temperature (45 degrees Celsius Input Cutoff/60 degrees Celsius Output Cutoff), or under temperature (0 degrees Celsius Input Cutoff/-20 degrees Celsius Output Cutoff).