Spurs are made from premium carbon steel - they are made to last. The points are held in the body with a set screw so the length which the point protrudes from the body can be set by the turner.These spurs are now SPRING LOADED!What this means is the point has a spring behind it so you will always achieve a positive connection with the piece you are turning. Not only that, you have complete control over the amount of tension in the spring by adjusting the screw in the bottom! The set screw in the side prevents the point from being ejected due to the tension in the spring.ONEWAY spurs have four aggressive teeth which bite into wood blanks.For direct mounting to your spindle, spurs are available with #1 or #2 Morse Taper.Approximate Package Weight: lb