Paired together to save you time and money, this convenient hand e-brake/boot kit features a powder coated finish with naugahyde boot.
Kit Includes:
-1- XEHB-7000F Floor Mount Hand Brake, Finish
-1- Floor Mount E-Brake Boot
XEHB-7000F Floor Mount Hand Brake, Finish
powder coated construction
Designed after the automotive industry
Ratchet cut gear plate and lock - heat treated for strength and
4-point mounting capabilities for floor mount or side mounting for applications
Comes complete with clevis for installation with Brake Cables - Cables are sold separately
Floor Mount E-Brake Boot
naugahyde boot
Polished base ring and screws
Base ring is 6.25" x 2.5" outside diameter and 5.25" x 1.5" inside diameter.
: .75"
Hole Pattern: 3.75" x 2.00"
Installation Tips
Install Tip: Every think about mounting the floor mount hand brake sideways in front of your ? You !
:
Length of upper chrome is 9-1/8" from rear to end of release button
From end of release button to center of clevis pin is 10-5/16"
From pivot point to end of release button is 9-3/16"
From pivot point to center of clevis pin is 1-7/8"
From center of clevis pin to top of is 3-1/4"
Mounting:
Mounting centers for horizontal brackets are 4-11/16"
Horizontal mounting bracket holes are 2" center to center side to side
Horizontal mounting bracket holes are also 4-11/16" center to center from front to rear
From center of clevis pin to end of clevis is 1-1/8"
Clevis referred to is at bottom of assembly and where the e-brake cables attach