The spare kit is designed specially for Bamboo X1/P1 series 3D printing project. If you are an X1E user and need to replace the AC to power supply connection cable. Not for P2S/H2D/H2C/H2S/A1/A1 Mini
Power switch assembly is a module mounted in the lower left corner of the back of the printer. It contains a socket for the power cord, a switch to control the power for the printer and cables used to connect it to printer's power supply, AC board and ground
When to Use: The switch is damaged; The internal connection cable is damaged; The socket has poor contact
It's crucial to power off the printer before performing any maintenance work on the printer and its electronics, including tool-head wires, because leaving the printer on while conducting such tasks can cause a short circuit, which can lead to additional electronic damage and safty hazard
Easy to instal, firstly disconnect power cord, Remove screw on rear cover and rear cover, remove excess chute and right side panel, then remove cable cover, disconnect the power cables from the power module and AC board, remove ground wire, finally remove the broken original power switch module, replace new. Please learn about the installation on Wiki
وصف
Power Switch Assembly Compatible with BambuLab P1P/P1S/X1/X1C: Socket Switching Module Replacement with Connection Cable 3D Printer Part
إكسسوارات الطابعة ثلاثية الأبعاد قاعة قاعة البروستورات مستشعر البروستورات استشعار مداهمة ميدان ميداني (5pcs) لبامبولاب X1/X1C/X1E/P1P/P1S - منع فشل التغذية ضمان طباعة سلسة
SAR 68
3D الطابعة ملحقات LED Single Magntic Control Switch Light: 3V White Lights 1PCS LAMP BEAD NO POWER
SAR 47
أدوات استبدال الكاميرا ثلاثية الأبعاد ملحقات الطابعة للمغامرة 5M/ 5M Pro: 7.09in كابل امتداد الكاميرا - في الوقت الفعلي والمراقبة عن بُعد عملية الطباعة AD5M حفظ الشعيرة
SAR 157
ملحقات الطابعة ثلاثية الأبعاد Imdinnogo Phaetus 0.4mm Hotend Kit لـ Adventuer AD5X: فوهة سريعة قابلة للفصل وسخان مبدد الحرارة ورأس الطباعة الطارد للحلق - ضمان طباعة مستقرة عالية السرعة
SAR 162
