INTBUYING G1/2" Water Separator for Air Compressor Filter with Gauge Air Compressor Pressure Regulator Polycarbonate Gas Source 0-145 PSI 4000L/Min Manual Drain
Advantages of G1/2" (1/2" NPT): Space saving (9.45 '' x 7.48 '' x 4.33 '' (24 x 19 x 11cm); Lightweight (5.5lb (2.5kg); More efficient airflow with less restriction. Multiple combinations: It can be used independently or in combination with an filter regulator lubricator
Supply Lubricating Oil: The lubricator mechanism of air compressor water separator supplies lubricating oil in an appropriate proportion to the air consumption. You don't need to worry about too much or too little lubricating oil
Advantages of Manual Drain: Low probability of failure, operator can fully decide the timing of drainage, and there is no compressed air discharge (only discharged during manual start-up)
Product Parameters: 1/2" pipe threads on both inlet/outlet. Max working pressure is 145 psi, operating pressure is 0-125psi, max flow rate is 4000L/Min. Reference formula: separator CFM=(compressor SCFM × 1.5)+future tool allowance
Wide Application: Air regulator with gauge are used widely used in various fields such as home workshops, spray guns, sanders, pneumatic tools, etc