Description
With a formidable power and an incredibly strong shaft, this high-tech electric outboard motor serves as an indispensable assistant for your aquatic endeavors. The brushless pure copper motor and agile steering ensure that you can stealthily catch your prey, embark on outdoor adventures, and navigate the waterways with optimal speed and low noise. Whether you're an angler, boater, or water enthusiast, this motor provides a cutting-edge solution for your needs.

Details
Adjustable Clamp: You can adjust the clamp to secure the machine to prevent it from dropping.

Anti-winding Propeller: The three-blade anti-winding propeller adopts a bionic fluid dynamics design to prevent winding, reduce underwater resistance, and improve propulsion efficiency.

Ergonomic Handle: Its handle conforms to the ergonomic design, making it comfortable to hold. The gear buttons at the handle are designed to facilitate your operation.

Heat Dissipation Holes: Multiple heat dissipation holes can help the motor dissipate heat and prolong its service life.

Application
This electric outboard motor is suitable for small ships with different materials less than 13.12ft in length, such as inflatable boats, iron boats, plastic boats, fiberglass boats, and wooden boats. It is widely used in fishery, aquaculture, outdoor exploration, etc.

Specification
Model: 48V4.0JET PUMP
Material: Aluminum Alloy
Process: Painting
Mounting Type: Transom
Operation Mode: Electric
Power: 1000W
Rated Voltage: 48V
Rated Current: 21A
Rated Speed: 3000-3700rpm
Gear Ratio: 3:2
Starting System: Acceleration Start Switch
Control System: Tiller Control
Batteries Included: No
Maximum Output Power: 1KW/1.0HP
Max. Speed: 15km/h/9.3mph
Motor Type: Pure Copper Brushless Motor
Reverse Gear: No
Thrust: 250kg/551.16lbs
Maximum Speed: 15km/hour
Recommended Battery: Selection of 30~120A Safe Storage Battery, Maximum Power Sustainable 2~8 Hours.
Propeller Model(in): 7-1/4x5-A(The Size of the Propeller is 7.25 inches/18.4cm, and the Propelling Distance of the Propeller is 5 inches/12.7cm after One Revolution)
Length of Suitable Ships: Less than 4m/13.12ft
Tail Plate Height: 42cm/16.53in(Short Shaft)
Product Size: 92*36.5*22cm/36.22*14.37*8.66in

Package Included
1* Electric Outboard Motor
All Accessories for Installation

Notes
1. Please note that the cover is not waterproof and is not recommended for use in heavy rain.
2. Please do not start the motor on the shore where there is a lack of water. Even if you want to test the motor, you should do it in the river!
3. Please do not modify this electric outboard motor, which is not safe. Please usually check the bolt, screws, and nut whether move or not.
4. Please note that this product does not include batteries.
5. Please wash the propeller with clean water after sailing in sea water or turbid water.
6. Please store the electric outboard engine in a dry and ventilated place away from direct sunlight.
7. Please allow slight color difference caused by shooting light and 1-3 cm error caused by manual measurement and make sure you don't mind before buying.