sensor
Current Sensors0-5V 0-10V 4-20mA RS485 plant photosynthetic transmitter photosynthetic active pyranometer sensorThe photosynthetically active radiation sensor adopts the photoelectric sensing principle and can be used to measure photosynthetically active radiation in the spectral range of 400700nm. The sensor uses high-precision photoelectric sensing elements with a wide absorption spectrum high absorption in the 400-700nm range and good stability; when there is light it generates a voltage signal proportional to the intensity of the incident radiation and its sensitivity is proportional to the incident light. Proportional to the cosine of a right angle. The dust cover adopts special treatment to reduce dust adsorption effectively prevent environmental factors from interfering with internal components and enable more accurate measurement of photosynthetically active radiation.SpecificationDC power supply7-30V DCenergy consumption0.06WOperating temperature-30℃+75℃response spectrum400nm700nmMeasuring range02500mol/.ssolve1 mol/secaccurate2%(1000umol/.s 60%RH 25)Response time10 secondslinearity1%long term stability2 yearsoutputRS485/4-20mA/0-5V/0-10VDimensions and installationinstallation method1. Use screws to pass through the mounting holes on the sensor and fix the sensor on the mounting bracket.2. Make sure the equipment is parallel to the ground (adjust the thumb screws and check the level of the bubble to determine whetherparallel lines)3. After installation remove the protective cover