Product Name: Sink Tap Back Nut
Product material: Plastic
Product color: Black
Product dimensions: The outer diameter of the back nut of the sink faucet is 45.5mm/1.79inch, the inner diameter is 25mm/0.98inch, and the height is 12mm/0.47inch
Product application: Hex nuts, with their advantages of light weight, easy installation, rust prevention, insulation safety, and wide adaptability, are widely used in the installation of single-cooling/cold and hot mixed faucets in household kitchens and bathrooms, as well as in the connection of water pipes in engineering scenarios such as hotels and office buildings. They can be stably used in humid environments and are both environmentally friendly and economical.
The usage method of the product: When using the sink tap back nut, first screw it into the thread at the bottom of the faucet, align it with the water pipe interface, and then tighten it moderately in a clockwise direction with a wrench or by hand. It can enhance the sealing with the raw material belt, avoid excessive stress after installation, and is suitable for the fixation and sealing of ceramic valve spool and other faucet.
Product application scope: The faucet nut is suitable for single-cooling and cold and hot mixed faucets in household kitchens, bathrooms, hotels, office buildings and other places. It is compatible with ceramic valve cores, rubber seals and other structures, and is compatible with common water pipe interfaces such as G3/4 (6 points). It can be stably used in an environment ranging from -20℃ to 70℃, meeting the needs of drinking water and general water usage scenarios.
Product content: 4 Plastic Nuts
Note:
Keep the parts out of reach of children.
For manual measurement, please allow for minor dimensional errors of the items.
Due to different screen displays, the actual color may vary slightly.