SRAM GXP Truvativ center shaft with ABEC-3 grade bearing MR2437H8-LLB

Inner diameter: 24.00 mm,

Outer diameter: 37.00 mm,

Thickness: 8.00 mm,

Quantity: 1 piece

Steel ball type: standard bearing steel inner and outer rings and balls

Ceramic beads: G5 grade black silicon nitride SI3N4 ceramic beads (outer ring surface laser lettering CERAMIC BALL)

Special note: Truvativ's central shaft, the size of the bearings on both sides is different, and the inner hole of the bearing on the other side is 22.20mm (22.2x37x8/11.50mm MR22237-2RS). In addition, SRAM uses another structural bearing (the protruding surface of the inner ring has a 7 ° taper MR22237-2RS-B). Please disassemble and test the original bearing on your car before taking a picture. Take a look at the structure of the protruding surface of the inner ring, so as not to make a mistake and cannot be installed and used.

Remarks: This bearing is a single (1), not a set (excluding the MR22237-2RS bearing on the other side), and the MR22237-2RS needs to be ordered separately.