1. [TEST OBJECT] This operation driver tester can detect low-speed chips disguised as high-speed chips, ensuring accurate performance evaluation simply by observing the output waveform and LED indicators to ensure the clarity of the signal
4. [TEST POWER] Measure the static current to understand the characteristics of the operation amplifier and distinguBLE model.
PCB] The PCB material ensures excellent maintenance and interchangeability for reliable testing

Technical data:
Item Type:Operation Amplifier Test Card
Size: Approx. 9.5 x 5.8 cm / 3.74 x 2.28 inches.
Power requirement: Voltage: DC 12V, Current: 100mA
Use:
For Single OP AMP Models: LM741, LF356, NE5534, OPT0871, TLP0871 and Other Standard Single Packs
For Dual OP AMP Models: LM358, NE5532, TL072, TL082, MC1458, RC4558, 0P275, AD827 and other standard packs for dual OP AMP
For quad OP AMP Models: LM30744, TL744, TL4004, TL4044, TL7444, TL4044, TL4044, TL404, TL404, TL40, LF AD713

Use:
Direct installation and use

List of package:
1 x Test Card

Note:
Testing instructions: 1. Just test one chip at a time. Use one of the three test sockets.
2. To test the static current, use the DC voltmeter on the digital multimeter. Test the voltage at 10 ohms, 1=V/10 (Ma). Example: V=15MV, resting current 1=1.5ma. (Do not press the red button on the right side of the chart at this time).
3. The test end can be connected to an oscilloscope or a frequency counter. Adjust the potentiometer to change the test frequency.