1. Efficient Use: The operating pressure range is 70‑150 PSI, which enable high working efficiency and even spraying as well.
2. Broad Utility: Suitable for glass etching and the removal of paint, rust, , moss, and scale on hot tub, tile and so on.
3. Wide Matching: Allows for a variety of blasting media such as steel grit, glass bead, silicon carbide, alumina and so on.
4. Good for Work: Highly compatible with most air compressor and its components, the sandblaster is very simple to operate.

Spec:
Item Type: Sandblaster
Operating Pressure Range: 70-150 PSI
Operating Average Pressure: 90 PSI
Tank Capacity: 600cc, 18 oz.
Air Consumption: 7.0scfm, 198l/min
No Load Speed: 6000RPM
Air Intake: 20 mesh filter, 1/4in
Abrasive Size: 46-100 Grit
Nozzle Size: 2-15/16in L, 7/32in DIA
Spray Hole Diameter: Approx. 5mm / 0.2in

How to Use:
1. After taking out the product, add an appropriate amount of sand to the product.
2. Use the pneumatic interface to connect the product to a air pump.
3. After starting the air pump, squeeze the product switch.

Package List:
1 x Sandblaster
1 x User Manual

Note:
1. When working, do not aim the Machine nozzle at any part of people or animals to avoid accidental injury.
2. The product does not have a pneumatic nozzle, you need to buy it yourself. The air inlet thread is 1/4in.