Important Notes: 1. This PD spoofing device only supports PD 3.0/2.0 and BC1.2 fast charging protocols. Ensure your charger uses one of these protocols; otherwise, voltage spoofing will fail. 2. If your charger supports the above protocols, its parameter label must indicate it can output voltages like 5V/9V/12V/15V/20V. If the charger lacks a corresponding voltage specification, it cannot output that voltage. 3. The board only triggers voltage output. The rated output current depends on the charger's rated current for the corresponding voltage. 4. The accuracy of triggered voltage and current is influenced by factors like the power source's voltage precision and current. The module does not determine the actu