Parameter Value
Model S10.1 / S10.2
S10.1 Rated Output 333mV, 3V AC rms
S10.2 Rated Output 4V DC (true-rms)
S10.1 Maximum Output (Overload) 4.5V AC pp
S10.2 Maximum Output (Overload) 4.5V DC
S10.1 Instantaneous Response Time ≤1μs
S10.2 Instantaneous Response Time Default 100ms (Adjustable)
S10.1 Power Consumption 70mW
S10.2 Power Consumption 100mW
Bandwidth 10Hz-20kHz (±3dB)
Power Supply 5V / 6-12V / 24VDC (5V only for 333mV output)
Rated Input Current 100A, 600A, 1000A, 3000A, 6000A, customizable
Reading accuracy: ±0.5% rdg, ±0.5% f.s. (center position)
Phase error: ≤0.5°
Zero drift (0A output): ≤1mV
Maximum rated voltage to ground: AC600V (CATIV), AC1000V (CATIII)
Temperature drift: ≤100ppm/℃
Output connector: Terminal type (3.81 pitch), 4-core wire, RJ12 crystal head
Rogowski coil inner diameter: 50/100/150/200mm, customizable
Rogowski coil cross-section diameter: Φ6, Φ8mm
Total weight: Approx. 130g (including 150mm coil + integrator)
Integrator dimensions: 281748mm
Cable length: Default 2m (between coil and integrator)
Accuracy guarantee: Coil switching cycles ≤10000 Operating temperature and humidity: 23℃±5℃, below 80% RH; no coil damage or deformation.
Conductor position influence: ±1%.
External magnetic field influence: ≤1.5% f.s. (400A/m, 50/60Hz).
Bias voltage: below ±1mV.
Workplace: Indoor, pollution level 2, altitude ≤2000m.
Operating temperature: -20℃~70℃.
Operating humidity: Maximum 80%, non-condensing.
Storage temperature and humidity: -30℃~70℃, below 80% RH (non-condensing).
Protection rating: IP54 (coil only, integrator not waterproof).
Applicable standards: EN61010, EN61326 series.
Withstand voltage: AC3kV rms (1 minute, 50/60Hz, coil only).
Product features: Integrated coil-integrator, mini and flexible, low power consumption.