بحث

بحث

بيت / Halder / المحامل والكرات والبطانات
تحديد موضع البطانات لقفل المزالج ومسامير القفل | d1 = M12 x 1.5 / d3 = 6.2 مم/للمسامير = 6 مم/الفولاذ المقاوم للصدأ | 22110.0476 in Saudi Arabia

تحديد موضع البطانات لقفل المزالج ومسامير القفل | d1 = M12 x 1.5 / d3 = 6.2 مم/للمسامير = 6 مم/الفولاذ المقاوم للصدأ | 22110.0476

SAR 204
– 1 +

مميزات خاصة

  • Nominal dimensions: d1 = M12 x 1.5 / d3 = 6.2 mm / for bolts = 6 mm / stainless steel

وصف

Positioning bushings are suitable for holding the locking pin of the locking latches or locking bolts.
Can also be mounted in retaining pieces, die-cast EH 22110. and retaining pieces EH 22120..
Low wear due to hardened tarnish cone.
Material:
Stainless steel, hardened.
Notes:
The thread is matched to the retaining pieces for locking latches and locking bolts, die-cast (EH 22110.) and retaining pieces for locking bolts and locking bolts (EH 22120. ).

منتجات شبيهه

{"error":"\u062e\u0637\u0623","cart_limit":"\u0644\u062f\u064a\u0643 \u0627\u0644\u0643\u062b\u064a\u0631 \u0645\u0646 \u0627\u0644\u0645\u0646\u062a\u062c\u0627\u062a \u0641\u064a \u0633\u0644\u0629 \u0627\u0644\u062a\u0633\u0648\u0642 \u0627\u0644\u062e\u0627\u0635\u0629 \u0628\u0643.","prod_limit":"\u0644\u0627 \u064a\u0645\u0643\u0646\u0643 \u0625\u0636\u0627\u0641\u0629 \u0627\u0644\u0645\u0632\u064a\u062f \u0645\u0646 \u0647\u0630\u0627 \u0627\u0644\u0645\u0646\u062a\u062c"}