1. [MAIN GOAL] The voltage frequency module multiple frequencies, depending on the input level
2. [0-10V TO 0-1 KHZ] Converts 0-10 V to a 0-10 KHz frequency pulse signal
3. [EASY TO OPERAT] Wide input voltage and frequency range, no series resistance required
4. [EASY WIRING] Clear connections, stable connection, minimal interference
5. [COMPACT SIZE] Mounting holes, easy installation without taking up space

Specification esifications:
Item Type: Voltage Frequency Module
Working Voltage: 13.5V-30V
Adjustable input voltage range: 0-10 V
Output Frequency Range: 0-10 kHz
Size: approx. 33 x 34mm / 1.3 x 1.34 inches
Wiring Instructions:
VCC: Operating voltage
GND: Stream Earth
F: Input frequency pulse signal
VOUT: Corresponding external voltage
GND: Starting ground
Display:
The frequency pulse signal is connected to F, and on the VOUT side there is a similar voltage output.
Input and output correspond to:
100Hz=1V
1 kHz = 10V

List of packages:
1 x voltage frequency module.

Note:
If a discrepancy occurs during operation, you can use the potentiometer on the board to adjust the calibration.