Comes with two countdown timers (each timer has a small compartment holding up to 7 tablets and embedded magnet), small and medium size portable containers with embedded magnet, and two threading adapters.
Attachable via threading adapters TO TOPS OF REVERSIBLE CAPS of prescription pill vials of the three sizes: “small”, “medium” and “large”. The timer is directly attachable to reversible caps of “medium” size prescription pill vials and, via “small” and “large” threading adapters, to reversible caps of the “small” size and the “large” size.
Can be used on magnetic calendar boards to reliably track your regimen.
The pill timer turns on when a user presses “CONTROL” button on the front panel of the timer and holds it for 3-5 seconds.
Two types of alarm modes: either (1) audio and flashing, or (2) silent and flashing. Easy switch from silent alarm mode to audio mode (on the side of the timer). The LCD displays either the “AUDIO ALARM” or “SILENT ALARM” setting.
The pill timer features FOURTEEN countdown alarm time presets: press once for 5 min; twice for 10 min; thrice for 15 min; then continue pressing for 20 min; 30 min; 45 min; 1 hour; and 2; 3; 4; 6; 8; 12; and 24 hours. And it also serves as a single compartment pill box, holding up to 7 tablets.
When the audio alarm goes off, it beeps for 10 seconds, the beeping repeats twice within 3 minutes. The red flashing LED light will continue to alert you for 1 hour and after one hour the timer goes in sleeping mode.
To reset the Alarm, the user must press the “CONTROL” button twice. The LCD display will show the preset alarm value and count down the alarm time from the start.
To change the Alarm setting when it is active, user must press the “CONTROL” button and hold it for 3-5 seconds until the LCD display shows “00:00”.
Includes one CR2032 Battery pre-installed. Battery can be easily exchanged by the user.
When “Low battery” is detected, the low battery icon appears on the LCD panel and the red LED light starts flashing.
TROUBLESHOOTING: If you experience an issue starting the timer after removing the battery insulator tab, please open and close the battery compartment to ensure proper battery contact. Then reset the timer by pressing and holding the front panel button for 3–5 seconds. If the issue persists, please contact us at [email protected] for a replacement.
If you experience any issue, contact us directly so we can help.