Large-sized stickers are rolled up for packaging. The small-sized stickers are packed flat.
Since the sticker is rolled up during packaging, when you receive the product, you will see bubbles in the transfer membrane, but the sticker is intact, it will not have any impact on your stickiness and effect. After installation is completed, the transfer film needs to be torn off.

INSTALLATION DETAILS
Lay the sticker out flat with something heavy on it before installation to make the sticker flatter.
1. Wipe off the dust on the car and spray soapy water.
2. Place the back of the sticker facing up, then tear off the bottom paper on the back and spray it with soapy water.
3. Stick a small part of the sticker on the car and fix it in place. Then, use a non-sharp scraper to scrape along the sticker to make it completely adhere to the car.
4. Finally, remove the transparent transfer film slowly.
NOTE: After installation, if there are still bubbles on the sticker, you can prick them with a needle. Then you can press the sticker to make it adhere.

SPECIFICATIONS:
Package includes: 1 set of flame stickers.
Material: Vinyl sticker.
Color: Black/White/Red.

TIPS:
1.Do not wax the car one week before using the sticker. The wax will make the sticker not sticky.
2. Do not wash your car within one week after filming. It is best not to expose it to exposure within 24 hours.
3. Stickers are consumables. Over time, the edges may peel off and some colors may fade.

NOTE:
1. Due to manual measurement, please allow a deviation of 1-3 mm.
2. If you find any problems, please leave us a message and we will answer your questions.