Description:
Direct replacement of your old injector and no modification needed.
Made of metal and plastic material which is durable and can use for a long time.
The high impedance fuel injector has been tested and exactly matches the internal coil resistance and fuel flow rate of OEM fuel injector.

Specification:
O-Rings Product Included: Yes, preinstalled
Orifice Type: 12 Holes Disc
Material: Metal, Plastic
Color: Blue
Voltage: DC 12V
OE Number: 23250-21040
Pin Number: 2
Dimension: 73x30x20mm/ 2.87"x1.18"x0.79"(L*W*H)

Note:
This installation should be done by an experienced mechanic who has access to a factory manual and all required tools!
Please check the fitment section of this listing before you bid.
Please kindly check again your engine volume!
This is a non-OEM product, accessory only!

Fitment:

for Toyota Yaris 1.5L 2Door 2006-2011
for Toyota Yaris 1.5L 4Door 2006-2012

Product Included:
4 x Fuel Injector

Installation:
Step 1. Make sure the engine is cool down. Disconnect the battery.
Step 2. Remove the bolts and brackets from the fuel rail.
Step 3. Disconnect the plug on each injector.
Step 4. Lift the fuel rail and remove the injector from the fuel rail.
Step 5. Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes.
Step 6. Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery.
Step 7. Double check for fuel leaks before and after starting the engine.