Installation Steps
1. Put on the steering wheel cover. Make sure the position is correct.
To ensure that the stitching on the back is not skewed, the leather should meet at the exact location of the center seam of the original steering wheel.
2. Attach the double-sided tape. You can stick the double-sided adhesive tape on the stitching on the inside of the leather.
Be careful not to put the double-sided tape on the edge, or the edge may not fit into the seam.
3. Tuck the edges. After positioning and applying the double-sided tape, use the edge tucking device to tuck the exposed edge
into the steering wheel's seam, taking care to tuck the edge at different angles.
4. Hand stitch. Select a thread 3-4 times the length of the sewing area, and then you can select the starting point for sewing.

Note: Please refer to the operation video or instructions on the detail page for the exact procedure. We will also update the video on YouTube in the future.