Pick-up Pulsar Coil Fit For Kawasaki KLF300 Bayou300 1986-2006 KEF300 Lacota300 95-04 #.59026-1088

FEATURES:
Brand new pickup/pulsar coil for you to repair your stator.
Direct replacement to your original unit.
Plug-and-play, direct fit, easy installation.
Often unavailable from the OEM manufacturer.
All products shipped are tested.

SPECIFICATIONS:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Pick up pulsar coil

Dimensions:
Height: 19mm
Length: 26mm
Width: 21mm
Bracket center to center: 35mm
Wires length: Approx.665mm

Other specifications:
Number of wires: 2
Number of plugs: 1
Number of pins: 2

REPLACEMENT PART NUMBER(P/N): 59026-1069, 59026-1092

VEHICLE MODELS FITMENT:
For Kawasaki KLF300 Bayou300 2WD 1986-1987
For Kawasaki KLF300 Bayou300 2WD 1988-2006
For Kawasaki KLF300 Bayou300 4WD 1989-2006
For Kawasaki KLF300 Bayou B 1988-2004
For Kawasaki KLF300 Bayou C 1989-2004
For Kawasaki KLF300 Bayou B Euro 1995-2006
For Kawasaki KLF300 Bayou C Euro 1995-2004
For Kawasaki KEF300 Lacota300 2WD 1995-2000
For Kawasaki KEF300 Lacota300 Sport 2WD 2001-2004

PACKAGE INCLUDED:
1x Pick up pulsar coil

NOTICE:
Not following these instructions may result in damaging the part or other components on your vehicle.
-By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
-Insulate your solders with heat shrink.
-Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
-Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010 in.
-If no spark or erratic spark, switch the wires at the plug.