Heater Water Inlet Pipe for Toyota Sienna 1998-2003 2006-2010 for Toyota Sequoia 2008-2013 HVAC Heater Hose Tee Connector 8724808030/87248-08030 Coolant By-Pass t Split Pipe 2 Pcs
[Fitment] This Heater Water Inlet Pipe suit for Toyota Sienna 1998-2003 2006-2010, for Toyota Sequoia 2008-2013. OE Number:8724808030/87248-08030.
[HVAC Heater Hose Connector] Heater Hose Fitting Adopt with durable hard aluminum alloy material and sturdy construction for longer sevice, effectively ensured the durability and reliabliity.
[Function] This HVAC Heater Core Connector connects heater hoses to the engine heater core, ensures proper coolant flow to and from the heater core for efficient heat transfer. It may become brittle over time and crack, leading to coolant leaks and heater performance issues. Replace it in time to avoid coolant leakage issue.
[Installation of Heater Hose Tee Connector] 1. Drain the residual coolant (or clamp hoses to minimize spillage). 2. Disconnect the old hose connector (may require cutting if stuck). 3. Install the new connector (use hose clamps if necessary). 4. Refill coolant and bled air from the system.
[Package] Include 1x HVAC Heater Hose Connectors. Please check and replace heater hoses if met issue like Coolant leaks under the car (usually near the firewall or passenger side), Low coolant levels with no obvious external leak, Heater not blowing hot air, Overheating engine (if coolant loss is severe), Sweet smell of coolant inside or outside the car.