Bring consistent bass performance to your system with a matched pair of Rockville W10K9D2 V3 subwoofers. Each subwoofer is rated at 800-Watts RMS and 3200-Watts peak and features dual 2-ohm voice coils for flexible wiring configurations. Frequency response is 37.8 Hz-1.5 kHz with 85 dB sensitivity, supporting integration into sealed or ported enclosures.

Each K9 V3 uses a 3" 4-layer aluminum former wound with OFC wire and double-stacked 185 oz magnets. The cast aluminum basket, Nomex spider, polypropylene dustcap, and high-temperature adhesives support stable operation. Optimized pole venting and inner dustcap structure assist airflow at the voice coil.

The cone assembly includes a non-pressed paper cone with stitched reinforcement, foam surround, chrome binding posts, and custom gasket. Mechanical travel is rated at 26 mm Xmax. Recommended enclosure volumes are 0.55-0.95 cu ft sealed and 1.2-1.8 cu ft ported. Cutout diameter is 9.37", mounting depth is 6.5", and weight is 16.5 lb per subwoofer.

Dual voice coils allow series or parallel wiring to achieve common impedance targets such as 1-ohm or 4-ohm configurations depending on amplifier compatibility.