Dash Cam Hardwire Kit USB C, OBD2 to Type-C Adapter Hardwire Kit with 24/7 Parking Mode, Low Voltage Protection (11.6V/23.4V) with 2 Modes Switch, Acc Detection, Plug and Play Continuous Recording
【 Wide Compatibility】-- Input: 12V-24V vehicle voltage to a stable 5V/3A output, for most USB-C dash cams, gps units, radar detectors on cars, trucks, suvs, commercial vehicles, ects. Please note: Your dashcam must have a USB-C power input. It must use the A5-B5 pin configuration. Not compatible with devices that require an A8-B8 pin interface."
【Smart Dual-Mode Switch for Dash Cam】-- Equipped with a dual-mode switch. Mode【-】for 24-hour parking monitoring, providing power to your dash cam even when parked. Mode【0】(ACC mode) ensures that the power automatically cuts off 20 minutes after the engine is turned off to prevent excessive power drain, enhancing battery life and protecting your vehicle's power supply
【24/7 Parking Monitoring】-- Mode【-】:24/7 Parking Surveillance,When your car is off, the dash cam power cord provides continuous power, provide 24/7 parking monitoring. Built-in low voltage protection prevents car-battery drain
【11.6V/23.4V Smart Low-Voltage Protection】-- This OBD2 dash cam hardwire kit is equipped with an intelligent program control chip, automatically cuts power when voltage drops below 11.6V (12V vehicles) or 23.4V (24V vehicles), preventing a dead battery
【Plug and Play OBD2 To USB C】-- Plug and play OBD2 to USB-C power cable compatible with any dashcam, plug the dashcam cable harness into the USB C interface of the car. No wire cutting, no fuse box, no risk to your car's circuit or warranty. The power cord of this OBD dashcam can be easily installed and is a nice choice for concealed installation.
【User for the OBD2 Power Cable for Dashcams】-- If you start the car and find that the device still does not power on after installing the OBD power cable, please drive the car for a short distance (reaching a speed of 20 km/h) to trigger the product's startup(because power isn't supplied immediately in certain models). Our OBD2 to USB C power cable for dash cam kit is 3.5 meters long, 1 pry tool, and 4 wire ties to meet your usage and installation needs
【High-Security Hardwire Kit for Dash Cam】-- Unlike those cheap generic cables, our dashcam hard-wiring kit comes equipped with a built-in fuse and multiple protective features (over-current, short-circuit, over-heat, and reverse connection) to safeguard both your dashcam and your vehicle.
【Type-C 90° Angled L-Shape Design】-- Perfectly for saving space and connecting cables in tight areas. In some cases, it also helps keep cables neatly organized, if your camera is bulky or has a side-mounted port, this product is the perfectly choice.
【Service Guarantee】 -- We always focus on products quality and service. YTAIMITOP provides any replacement in future use, please rest assured to buy.