HUAZHUN 2 in 1 Lightning to RJ45 Ethernet Adapter for iPhone 14/iPad, with Fast Charging Port, Portable Ethernet Adapter Compatible with iPhone14/13 or iPad, Plug and Play, Supports fast Internet transmission of up to 100Mbps Ethernet LAN wired network.

Wide Compatibility
iPhone 14 / 14 Plus / 14 Pro / 14 Pro Max
iPhone 13 / 13 mini / 13 Pro / 13 Pro Max
iPhone 12 / 12 mini / 12 Pro / 12 Pro Max
iPhone 11/11 Pro/11 Pro Max
iPhone XS Max/XS/XR/X
iPhone 8/8 Plus
iPhone 7/7 Plus
and iPad Pro 12.9-inch/Pro10.5-inch/Pro 9.7-inch, iPad Mini 4/Mini 3/Mini 2, iPad Air/Air2. Support iOS 10 and up.

How to Use?
1. Turn off Wi-Fi on your iPad or iPhone.
2. Insert your router-connected Ethernet cable into Ethernet port of adapter, and connect the lightning end into your iPad or iPhone.
3. Go to"Setting" in your iPad or iPhone and Click the "Ethernet" to obtain an IP address.
4. Open Safari and check whether the network can be used normally.

Please note
1. Please make sure your router-connected Ethernet cable is connected to internet.
2. This adapter can't dial-up internet itself,need your router device provide a IP by DHCP service.
3. This adapter cannot work with the devices whose system is below iOS10.0. Please upgrade your system to iOS 10.0 or up before using it.
4.When connected to your mobile phone and network, the blue light will light up and flash, which greatly facilitates your use, so you don't have to worry about whether the adapter is ready to work.

Packing List
1 x 2 in 1 Lightning to RJ45 Ethernet Adapter for iPhone
1 x User Manual