Starlink Gen 3 Mount - Adjustable Wall/Roof Mounting Kit for V3 Standard Dish, 0-180° Tilt 360° Rotate Steel Bracket with Sandblast Bake Paint, Wood/Concrete Screws Included
Fits Gen3 dish like a glove – Steel bracket sized 437x150x100mm clamps the Starlink Gen3 standard dish securely with 360° dish mount rotation to fine-tune direction for peak satellite signal strength and coverage in your backyard or remote cabin.
Tilts 0-180° for any roof angle – Base adjusts from flat to 180° tilt so you mount on slanted roofs, flats, attics or eaves with up to 4-inch overhang to dodge ground obstacles and grab the best elevation angle.
Weathers storms with 2mm thick steel – 2mm wall tubing delivers rigid wind/quake resistance while sandblasted and baked paint coating amps up rust, UV, and harsh weather protection for years of outdoor reliability.
Installs fast with included hardware – Comes with wood self-tapping screws and concrete expansion anchors for various walls like wood, brick, or concrete – grab a drill and screwdriver to set up in minutes without extra trips to the store.
Lightweight yet bombproof at 1.5kg – Balanced 1.5kg design makes handling easy during install but the thick steel and dual adjustments lock everything solid once tightened to avoid wobbles.