False Adjustable Fork For Work On Plants, With Pulley, Easily Recoverable From The Bottom. Designed To Work On Plants, The False Eject Fork Allows You To Install The Working Rope, Protecting The Tree, Even In Narrow Forks. It Ensures Various Installation Configurations On One Or Two Branches And Has A Regulator Which Allows To Precisely Adapt The Length Of The False Fork. The Ascents Of Rope And The Shaft Displacements Are Optimized, Thanks To The High Efficiency Pulley Which Facilitates The Sliding Of The Anchor Rope. The System Is Easily Recoverable From The Bottom, Thanks To The Recovery Ball Provided. False Adjustable Fork That Allows You To Install A Working Rope, Protecting The Tree: - Various Possible Installation Configurations On The Branch: Winding Or Choke. It Is Also Possible To Connect Two Anchorages Small Branches, - Regulator Which Allows To Precisely Adapt The Length Of The Tape, - Specific Design That Helps Protect The Tree, - Product Supplied With A Yellow Ribbon 1.5 M Long High Visibility. The Webbing May Be Replaced Or Combined With Another Tape Of 1.5 Or 2.5 M To Lengthen The False Fork And Allow The Work Of Larger Trees, - Rope Installation Only Possible If The False Fork Is Properly Installed And The Opening Point Of Attack Is Blocked, - The Opening Point Of Attack Remains Locked Until The Rope Is Installed In The Pulley, - Privileged Use Of Abseiling. The System Can Also Be Used On Single Rope (More Information In The Prospectus). Optimized Efficiency Ratings: - The Rope To Slide Through The Anchor Optimized, Thanks To The Pulley Integrated High Performance, - Possible Use Two People To Perform A Rescue. Easily Retrievable From The Bottom System: - Point Of Releasable Attachment With The Recovery Ball, Once Out Of The Rope From The Pulley, - Ball Of 21 Mm Yellow Recovery, Specially Designed For The False Eject Fork, For A Facilitated Recovery From The Bottom, - Buckle Webbing And Thin Enough To Reduce The Risk Of False Latching Shaft Fork.