XMSJSIY OBD Power Cable for Dash Camera 90 Degree Right Angle Micro USB to OBD Parking Monitor Cable 12V-24V to 5V Dash Cam Hardwire Kit with Voltage Display and Low Voltage Protection - 3.5M/11.48FT
【Two Working Modes of OBD Power Cable】Mode 1: Parking monitoring function. Select the voltage range (11.6V/23.4V; 11.9V/23.8V; 12.5V/25.0V) from the switch on the power cable. Within the selected voltage range, the driving recorder will continuously monitor; When the voltage is below the protection value, the power cable will delay for 5 minutes before shutting down the output and stopping the power supply. The driving recorder will shut down after the battery is depleted. Mode 2: When the car is stationary, turn off the output. Select the 20MIN switch on the power cable. After turning off the car for 20 minutes, OBD power cord will automatically stop supplying power and turn off the output
【3 Level Voltage Protection】Dash Cam OBD Hardwire Kit is applied to vehicles with voltages ranging from 12V to 24V. OBD power cable is equipped with low voltage protection and can be selected from three precise cut-off voltages (11.6V/11.9V/12.5V for 12V vehicles and 23.4V/23.8V/25.0V for 24V vehicles). When the battery voltage drops to the threshold of 11.6V or 23.4V, the power output will automatically cut off to ensure normal vehicle start-up
【90 Degree Right Angle Micro USB to OBD Dash Cam Power Cable】OBD Power Cable for Dash Camera is a 90 degree right angle Micro USB plug, OBD2 connector, Micro USB to OBD dash cam hardwire kit with LCD screen, real-time voltage monitoring, and supports time-lapse video recording function. (Note: The delayed video parking monitoring function requires the ACC signal of the driving recorder to be defined as Pin 4)
【Plug and Play Installation】Micro USB OBD power cord for dash camera is directly inserted into the OBD2 port of the car to obtain power and supply power to Micro USB devices, without the need to remove the vehicle's fuse box to connect the power supply. After installation, the car needs to vibrate or reach a certain speed to trigger normal operation of the power cord
【Wide Compatibility】90 degree right angle Micro USB OBD2 power cord Hardwire kit is compatible with 12V-24V cars, trucks, wagons, ships, ferries, and other devices with OBD ports; Micro USB output port is compatible with car recorders, GPS navigators, and radar detectors, and OBD power cord supports a maximum output of 5V/3A
【 Precautionary Note for Micro USB to OBD Power Cable 】1. Micro USB connector uses the ACC (Pin 4) signal pin, which may not be compatible with driving recorders that use other signal pins. To use time-lapse video recording, please confirm that your dash cam supports ACC (Pin 4) signal pins
【 Tips 】 1. In 20MIN mode, after the car is turned off and powered off, it takes 20 minutes for the product to power off, and do not let the car vibrate, otherwise the OBD power cord will not automatically power off and keep the driving recorder working normally. 2. After installation, if the OBD power cord cannot supply power to your device, your car needs to vibrate or the speed exceeds 15KM/h, and the car voltage reaches 13.5V, the power cord will trigger normal operation