Vacuum Pads
Flat Suction Cups
Suitability for Industry Specific Applications
Applications Flat Suction Cups SGPN
Round, flat suction cup for handling of wooden veneers, wafers and solar cells
Handling of various packing material, e.g. plastic films, paper, blister packs
Gentle handling of plastic films and paper due to flat, long-tapered sealing lip and inner support
Design
Robust, wear-resistant suction cup SGPN (3) with single sealing lip, consisting of suction cup SGP (2) and connection nipple (1)
Nipple plugged into cup
With each nipple family, the replacement cups and nipples can be combined as desired
Our Highlights... Your Benefits...
Flat, long-tapered sealing lip and inner support
No pulling-in to the suction cup, i.e. very suitable for plastic film, paper and solar cells
Material: natural rubber NK 40 Shore A,Silicone SI 50 Shore A ,HT1
No crinkling when gripping paper and plastic film
to , UV radiation and heat
No marks on the workpiece
Flat suction cup (round) for careful gripping of paper, plastic film, etc.
Suction cup material:
Natural Rubber NK-40 ,Color: Black, Material hardness: 40 °Sh
Fluorocaoutchuc FPM-65 ,Color: brown ,Material hardness: 65 °Sh
Suction cup material: Silicone SI ,Color:White,Material hardness: 50 °Sh
We also provide the red color. If you need the red color, please note the color on the order message.
Designation Code Flat Suction Cups SGPN
Flat suction cup SGPN (elastomer part + connection nipple) is delivered unassembled.
Suction cup of type SGP elastomer part, available in various diameters and materials
Connection nipple of type SA-NIP available with various threads Available spare parts: suction cup SGP, connection nipple SA-NIP
Flat Suction Cups SGPN
The specified suction forces are theoretical values at a vacuum of -0.6 bar and with a smooth, dry workpiece surface - they do not include a safety factor
The recommended hose diameter refers to a hose length of approx. 2 m
Sucker size control drawing
Acceptable dimensional tolerances for rubber parts concerning to DIN ISO 3302-1 M3
External dimension of the suction cup when it is pressed against the workpiece by the vacuum
Acceptable dimensional tolerances for rubber parts concerning to DIN ISO 3302-1 M3
External dimension of the suction cup when it is pressed against the workpiece by the vacuum
- -_- - -|-_-|-
==========
High-concerned chemical : None
Type : Actuator