بحث

بحث

بيت / GBA-SZC / قطع غيار وملحقات الطابعة ثلاثية الأبعاد
CR10s PRO/V2 جميع المعادن Hotend، فوهة نحاسية مطلية بدرجة حرارة عالية، كتلة سخان، كسر الحرارة من سبائك التيتانيوم، لـ CR-10s PRO، CR-10s Pro V2 CR-10 Max، Ender 3 Neo، Ender 3 V2 Neo Hotend. in Saudi Arabia

CR10s PRO/V2 جميع المعادن Hotend، مجموعة ترقية Hotend الدقيقة، فوهة نحاسية، كسر الحرارة من سبائك التيتانيوم، لـ CR-10s PRO، CR-10s Pro V2 CR-10 Max/Ender 3 Neo/Ender 3 V2 Neo.

SAR 152
– 1 +

مميزات خاصة

  • These nozzles are engineered for ultimate high temperature performance. Made from a special high temperature copper-alloy with a softening point of well above 500°C, and with much-increased thermal conductivity these copper nozzles are perfect for high temperature applications, while working perfectly with everyday filaments like PLA, ABS and spoolWorks EDGE.
  • The Plated Copper Nozzles and Plated Copper Heater Block is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the high-temperature 3D printing that other nozzles can't handle.(but is particularly important at temperatures above 280°C where a silicone sock can't be used.)
  • The Heatbreak replaced by TC4 material into GRADE5.High quality raw material.High precision production to provide excellent thermal isolation between heater and cooling block.Strict quality assurance.No burrs,Clean surface.(Reducing the chance of filament clogging)
  • The Heatsink and Heater Block Is high quality fine processing aluminum .It is not low quality or cheap aluminum.Coupled with high-precision CNC machining, and strict quality assurance Which brings the high-quality HOTEND Kit.
  • Compatible with CR-10 max/Cr-10s Pro/Cr-10s Pro V2 /Ender 3 Neo/Ender 3 V2 Neo 3D Printer.

وصف

Recommended slicer setting:
retraction speed over 80MM/S
retraction length 2.5-4MM

If you are facing PLA clogging problem, please try the followings:
1. Increase the retraction speed. The speed may have being limited in the firmware try to change it. G-command "M203 E200"
2. Increase the extruder acceleration. Check your firmware settings. G-command "M201 E9000"
3. Reduce the retraction length. It depends on your machine setup.
4. Increase the nozzle temperature by 5-10 degrees.
5. Do not install the 2 screws for support the heatblock like the stock hotend on the CR-10 printer.
6. Make sure that there is no gap between the heatsink and the heat breaker.

NOTE:
This product only supports 1.75mm filament!!!
We found that many customers do not know how to properly install the nozzle.
Remember the core issues in the installation process.
Just make sure your nozzle and HEAT BREAK front end are tight and sealed. Otherwise, the filament will leak along the screw holes.

Packing list:
MK8 Plated Copper Nozzle 1.75/0.4mm x 1
Titanium alloy heat break 1.75MM x 1
Plated Copper Heater Block x 1
Aluminium CR-10s PRO Heatsink x 1
Silicone socks x 1

منتجات شبيهه

{"error":"\u062e\u0637\u0623","cart_limit":"\u0644\u062f\u064a\u0643 \u0627\u0644\u0643\u062b\u064a\u0631 \u0645\u0646 \u0627\u0644\u0645\u0646\u062a\u062c\u0627\u062a \u0641\u064a \u0633\u0644\u0629 \u0627\u0644\u062a\u0633\u0648\u0642 \u0627\u0644\u062e\u0627\u0635\u0629 \u0628\u0643.","prod_limit":"\u0644\u0627 \u064a\u0645\u0643\u0646\u0643 \u0625\u0636\u0627\u0641\u0629 \u0627\u0644\u0645\u0632\u064a\u062f \u0645\u0646 \u0647\u0630\u0627 \u0627\u0644\u0645\u0646\u062a\u062c"}