مميزات خاصة

The P1S version without rubber plug is specially designed for bamboo P1S to adapt the cable chain. It is also compatible with P1P especially when cable chain is added. Not for X1/X1C/X1-carbon/P2S/A1/A1 Mini/H2D/H2C/H2S
The P1 Series tool-head cable connects the printer headboard and the motion control mainboard to supply power and data communication
Flexible cable resist wear, kinking, and tangling, can uninterrupted filament feeding and smoother 3D printing
When to Use: If a cable is damaged during maintenance or becomes burnt during regular use, it should be replaced
Easy to install, you firstly remove rear panel, unscrew the 4 screws that fix the rear housing of the tool-head and remove the rear housing, then remove extruder interface board, finally loosen tool-head cable from the clips, remove tool-head cable, can replace broken original one. Learn more about the replacing the P1 Series Toolhead Cable on Wiki

وصف

Package Include:
1Pcs spare P1 Series Tool-head Cable
It is the signal cable from the MC board to the extruder board on the tool-head

منتجات شبيهه

{"error":"\u062e\u0637\u0623","cart_limit":"\u0644\u062f\u064a\u0643 \u0627\u0644\u0643\u062b\u064a\u0631 \u0645\u0646 \u0627\u0644\u0645\u0646\u062a\u062c\u0627\u062a \u0641\u064a \u0633\u0644\u0629 \u0627\u0644\u062a\u0633\u0648\u0642 \u0627\u0644\u062e\u0627\u0635\u0629 \u0628\u0643.","prod_limit":"\u0644\u0627 \u064a\u0645\u0643\u0646\u0643 \u0625\u0636\u0627\u0641\u0629 \u0627\u0644\u0645\u0632\u064a\u062f \u0645\u0646 \u0647\u0630\u0627 \u0627\u0644\u0645\u0646\u062a\u062c"}

مرحبًا،

بحث

كابل رأس أداة Immdinogo متوافق مع BambuLab P1P/P1S: استبدال سلك التوصيل للإشارة أو ملحقات الطابعة ثلاثية الأبعاد لنقل الطاقة

مميزات خاصة

وصف

منتجات شبيهه