Run Out of the Right Connector Mid-Job. We've All Done It.
Most wiring jobs don't need just one connector type. A landscape lighting run needs 2-pin junctions. A ceiling fan needs single-wire feeds. A 3-way switch or automotive circuit needs 3-conductor connections. When you're working with a single connector size, the second you hit the wrong junction type, you stop.
This kit solves that before the job starts.
D1 + D2 + D3 — All Three in One Box:
D1 (1-Pin): Single-wire feeds — lamp leads, individual sensor lines, solo power runs.
D2 (2-Pin): Two-wire circuits — LED strip extensions, speaker pairs, standard low-voltage lighting.
D3 (3-Pin): Three-conductor wiring — appliance feeds, 3-way automotive circuits, RGB or 3-channel control lines.
Same Format Across All Three:
No stripping. No soldering. No electrical tape.
Lift the lever → insert the cable → press the locking buckle closed → dock the paired connector. Done in under 15 seconds per junction, regardless of which pin count you're using.
What Makes This Kit Different:
Material: Polycarbonate shell rated to 135°C — holds rigid in enclosed fixtures and automotive panel heat that softens ABS and PA66 connectors.
Contact: Modified copper with brass spring clip — constant clamping force, no relax-over-time failure mode.
Rating: 300V / 9A. Specified. AWG 22–18 solid and stranded wire, 1.6–2.1mm diameter.
Format: Two-connector dock system — each plug in wire connector secures one cable end, the pair docks to close the circuit. Separates and re-docks cleanly when you need to extend a run or reroute a section.
Four Kit Sizes:
30-count (D1×10 + D2×10 + D3×10) — trial kit, small repair
50-count (D1×15 + D2×20 + D3×15) — single-room or vehicle installation
100-count (D1×25 + D2×50 + D3×25) — medium project, full landscape grid
120-count (D1×20 + D2×80 + D3×20) — LED-heavy install with full-run stock
Compatible With:
LED strip lighting — interior, under-cabinet, cove, accent
12V / 24V landscape lighting and garden fixtures
Automotive and marine low-voltage circuits
Appliance control wiring, speaker runs, DIY electronics
The box that covers every junction. Pick the count that fits the job.
Add to cart.