مميزات خاصة

Cemented Carbide Construction – Manufactured from carbide with suitable toughness and wear resistance for milling applications.
Round Insert Geometry – RPMW/RPMT series inserts feature a circular cutting edge with an effective radius of 5 mm, providing smooth cutting and excellent surface finish.
VP15TF Grade – TiAlN‑based PVD coating combines a fine‑grain carbide substrate with a wear‑resistant layer, suitable for milling steels and stainless steels.
Double‑Sided Design – Each round insert can be indexed multiple times, offering two cutting edges per insert for economical use.
Pack of 10 – Delivered in a compartmentalized plastic box containing ten inserts, protecting the edges during transport and storage.

وصف

These RPMW1003MO and RPMT1003 inserts are round milling inserts designed for use in indexable end mills and face mills. The round profile distributes cutting forces evenly, allowing higher feed rates and improved surface finish, especially on contour and 3‑D milling operations.

Technical Parameters:

Models: RPMW1003MO, RPMT1003

Geometry: Round insert (R5 radius) with MO chipbreaker

Insert diameter: approx. 10 mm (0.39 inch)

Thickness: approx. 3 mm (0.12 inch)

Radius: 5 mm (0.197 inch) effective cutting radius

Grade: VP15TF – PVD TiAlN coating on fine‑grain carbide

Cutting edges: 2 edges per insert (double‑sided)

Quantity: 10 inserts per box

Compatible cutters: Suitable for RPMW/RPMT insert pockets on indexable end mills and face milling cutters

Grade Details:

VP15TF: Combines a tough carbide substrate with a TiAlN‑based PVD coating, providing a balance of toughness and wear resistance. Recommended for milling steels, stainless steels and cast irons at medium to high cutting speeds.

مرحبًا،

بحث

إدراجات طحن الكربيد لـRPMW1003MO/RPMT1003 VP15TF، R5 نصف القطر، 10 قطع (RPMT10t3)

مميزات خاصة

وصف

منتجات شبيهه