MAXAZTEX ADHESIVE HOOKS CAN MEET ALL YOUR NEEDS！

How to use:
1. Clean the surface of oil / dust / water. Keep dry before use.
2. Remove the transparent protective film. Do not touch the adhesive surface with your hand or finger.
3. Press the surface with the hook on the wall and make sure that the hook is firmly connected to the wall.
4. Before use, test whether the hook is attached after 24 hours.
5. Clean the adhesive surface with water when it is dirty. Do not touch it by hand, when it is dried, it can be used again.
6. Press and hold the protruding position of the base plate to slowly remove the hook. No traces are left behind.

Specification:
★Colour: transparent.
★Size: 60 x 60 mm.
★Material: PVC + 304 stainless steel.
★Package lists: 12 hooks.

Reusable:
1. Use a hair dryer to heat the hook/PVC.
2. Then press the middle of the hook and slowly remove the film from the surface.
3. The PVC leaves no marks. After cleaning and drying the PVC, the hook can be used again.

Note:
1. Do not stick to the surface of water, dust, oil, wax. Please clean the adhesive surface with water if it has covered dust before repositioning the hook.
2. Do not hang valuable and fragile items.
3. Do not use near high temperatures.
4. Please do not use it on painted wall.
5. Normally on the smooth tile surface, this hook can hold up to 10 kg. But we would not recommend more than 5 kg for a long time.