Waveshare RP2350-PiZero Development Board, Based On The Raspberry Pi RP2350 Dual-Core & Dual-Architecture Microcontroller, 520KB SRAM And 16MB
Onboard Flash Memory, Compatible With Raspberry Pi 40PIN GPIO Header

Board Specifications
RP2350-PiZero is a high-performance and cost-effective microcontroller board designed by Waveshare, onboard DVI interface, TF card slot and PIO-USB port,
compatible with Raspberry Pi 40PIN GPIO header, with reserved solder pads for PSRAM chip expansion, easy to develop and integrate into products.

RP2350B microcontroller chip designed by Raspberry Pi in the United Kingdom
Adopts unique dual-core and dual-architecture design: dual ARM Cortex-M33 or dual Hazard3 RISC-V processors support, flexible clock running up to 150 MHz
520KB of SRAM, and 16MB of onboard Flash memory, with reserved solder pads for PSRAM chip expansion
Type-C connector for easier use
Onboard DVI interface can drive most HDMI screens (DVI compatibility required)
Supports using as a USB host or device via onboard PIO-USB port
Onboard TF card slot for reading and writing TF card
Onboard Lithium battery recharge/discharge header, suitable for mobile scenarios
USB 1.1 with device and host support
Low-power sleep and dormant modes
Drag-and-drop programming using mass storage over USB
Adapting 5 × multi-function GPIO pins
2 × SPI, 2 × I2C, 2 × UART, 2 × 12-bit ADC, 16 × controllable PWM channels
Accurate clock and timer on-chip
Temperature sensor
Accelerated floating-point libraries on-chip
12 × Programmable I/O (PIO) state machines for custom peripheral support

Package Content
RP2350-PiZero x1

Note
Development Resource is provided , please contact with us to get if needed.