SBR and DBR have patent-pending precision-engineered prepunched slots strategically located to enable 12 in., 16 in. and 24 in. on-center stud spacing and can be used to space the studs without having to mark the top track for layout
The SBR will accommodate 3-5/8 in. and 6 in. studs in thicknesses of 33 mil (20 ga.) thru 68 mil (14 ga.)
In off-layout or end-of run conditions, the hat-section profiles enable clip attachments to the stud with Simpson Strong-Tie LSSC or RCA connectors
Prepunched holes in the SBR provide rapid screw installation when spacer-bracer splices are needed for axial load-bearing studs
Simpson Strong Tie S8PTD1 8D Preservative-Treated Wood Decking Nails 2-1/2-Inch and 11-Gauge, 304 Stainless Steel, 1-Pound, 115-Piece
SAR 111
-8%
Simpson Strong-Tie IUS Galvanized Face-Mount Joist Hanger for 2-1/2 in. x 11-7/8 in. Engineered Wood
SAR 61
Simpson Strong Tie TRX20SD Trex Deck-Drive Dcu Screw Plugs, 20 sq. ft., Saddle (75-Per Pack), Vinyl, Flat
SAR 123
Simpson Strong Tie S16PTD1 16D Preservative-Treated Wood Decking Nails, 3-1/2-Inch and 9-Gauge, Stainless Steel, 1-Pound, 56-Piece
SAR 69
