This Kit Rebuilds 1 Cylinder If your lift has a TEXAS HYDRAULICS cylinder in it, it will be approximately 72" tall with a small bleeder screw at the top. Look apprx 6" below the bleeder screw near the top of the cylinder to see ID stampings (see stamping example PICS 8, 9, & 10)If it reads "TXT" or "TH" followed by #s this is the pRop seal kit for your lift.
Also you may find fj7664 FJ783. These 2 numbers are the cylinder part numbers but you still need stampings "TXT" "TH" or "T" If you have your cylinder apart already, compare your piston seal with the one pictured to the left.
This kit came in the following model lifts and may fit others as well SP55 SP80-4 SP80-5 SP84-8 SP84-9 SP89-10 SP84-11 SP84-16 SPO84 SPOA84 AR94 SP94 SPO94
This Kit Rebuilds 1 Cylinder
If your lift has a TEXAS HYDRAULICS cylinder in it, it will be approximately
72" tall with a small bleeder screw at the top. Look apprx 6" below
the bleeder screw near the top of the cylinder to see ID stampings
(see stamping example PICS 8, 9, & 10)If it reads "TXT" or "TH"
followed by #s this is the pRop seal kit for your lift. Also you may
find fj7664 FJ783. These 2 numbers are the cylinder part numbers
but you still need stampings "TXT" "TH" or "T" If you have your cylinder
apart already, compare your piston seal with the one pictured to the left.
This kit came in the following model lifts and may fit others as well
SP55 SP80-4 SP80-5 SP84-8 SP84-9 SP89-10 SP84-11 SP84-16 SPO84
SPOA84 AR94 SP94 SPO94 SPOA84C AR98 ARO98 spo82 spoa82 sp88
sp98 spo88 SPOA88 DCOA7 SPOA98 AR9 ARO9 SP7 SPO7 SPOA7 SP9 SPO9 SPOA9 TLO7 SPO12-10