Search

Search

Home / Ace Crew / Fittings
AceCrew Brass Solenoid Valve 1 inch NPT, 110VAC, 120VAC Normally Closed - flow control valve suitable for gas, air & fluid in Saudi Arabia AceCrew Brass Solenoid Valve 1 inch NPT, 110VAC, 120VAC Normally Closed - flow control valve suitable for gas, air & fluid in Saudi Arabia

AceCrew Brass Solenoid Valve 1 inch NPT, 110VAC, 120VAC Normally Closed - flow control valve suitable for gas, air & fluid

SAR 247
Brand
Ace Crew
Category
Fittings
– 1 +

Special Features

  • AceCrew Industrial grade Electric Solenoid Valve Normally Closed
  • Size 1 inch NPT thread ,Voltage 110VAC , 120VAC
  • Brass inlet & outlet NPT Thread , easy to install with 2-way 2-position direct lift diaphragm
  • Normally Closed operation for gas and liquid flow control. Valve will open for flow when energized. Flow rate Cv = 12 ; Unidirectional (indication on brass body)
  • Pipe Size : 1" NPT Female (11½ TPI) . Orifice Diameter : 1" (25 mm) Seal/Diaphragm : NBR (Buna-N, Perbunan, and Nitrile rubber)
  • Current : 0.2 Amp . Wattage : 24 Watt . Operating Pressure Differential : 0-145 psi (0-1 MPa, gravity-feed capable)
  • Suitable for Low viscosity fluid, Water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel. Not Suitable for gasoline.
  • Operating Temperature : 15-125 °F (-10~50 °C). To avoid damaging the coil , this valve is not recommended to be in continuous use for more than 8 hours in a single cycle. Media Temperature : 15-180 °F (-10~80 °C) .
  • Weight of solenoid valve : 2 lb 4 oz

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}