Bearings
Bearings
Model: 124219H15-4
Inner Diameter: 12mm
Outer Diameter: 42mm
Height: 19mm
H Groove Width: 15mm
H Groove Depth: 4mm
Quantity: 1PC
Model: 124219H6.5-4
Inner Diameter: 12mm
Outer Diameter: 42mm
Height: 19mm
H Groove Width: 6.5mm
H Groove Depth: 4mm
Quantity: 1PC
What is H-Groove Wheel Bearing?
H-Groove Bearings are for track or floor operation on inverted angle iron track in production lines.
They are also used Doors and windows track , Pulley , Move the door , Round rail , Work-word steel , Angle Square tube track.
H-Groove Bearing Use
H-groove bearings for precision general purpose parts compared with the general mechanical parts need to be more
meticulous and careful installation and commissioning treatment.
1) Keep the bearing and its surrounding environment clean, as far as possible in closed or semi-enclosed
conditions for installation and use;
2) The need to use suitable tools and methods (heating) to install bearings, to avoid savage knocks, to cause a
strong impact on the bearing, damage the internal channel;
3) Keep the bearing well lubricated and use the appropriate lubricant;
4) Pay attention to bearing anti-rust, avoid use in wet places, installation and disassembly need to wear gloves;
5) Develop daily operating specifications for the use of bearings;
Features:
Supports radial and axial loads between rotating and non-rotating components
Stamped steel cages evenly distribute the rollers to reduce friction, vibration and noise, providing operational reliability. A precise surface finish contributes to reliable bearing performance.