Specification:
Item Type: Pneumatic Solenoid Valve
Product Material: Aluminium Alloy
Voltage Variation: -15% ~ +10%
Applicable Fluid: Air
Pressure Range: 0~0.7MPa
Ambient Temperature and Fluid Temperature: -10~50℃
Response Time: 20ms or less (at 0.5MPa).
Maximum Operating Frequency: 10Hz
Package List:
1 x Pneumatic Solenoid Valve
Note:
1. When installing, please pay attention to whether the gas direction and the connecting tooth type are correct. The medium used must be filtered by a 40 filter ;
2. Please pay attention to whether the installation conditions meet the technical requirements (such as voltage, working pressure, temperature range, etc.), then install and use;
3. Try to avoid using in a vibrating environment, and pay attention to anti freezing measures at low temperatures;
4. When connecting the pipeline, make sure that the material tape is not wrapped over the end of the joint teeth, and pay attention to clean the dust and in the pipeline joint to prevent impurities from entering the valve body;
5. Please pay attention to dustproof work when not in use. When disassembled and not in use, please do the dustproof work for the air inlet and outlet;
6. It's recommended to press the solenoid valve reset button once before use to ensure that the solenoid valve returns normally;
7. When the whole machine is adjusted, it is recommended to adjust with a manual device first, and then perform power on debugging.