Flexible Materials
Suitable for cutting materials such as solid
wood board, particle board, plywood, and fiberboard
Compatible Devices
Recommend purchasing cutting tools through
legitimate channels to avoid damaging your machine
Light gold Coating Process
The blade adopts new spray painting technology,
which is beautiful, elegant resistant and wear-resistant
1/4 inch=metric 6.35mm,
1/2 inch=metric 12.7mm.
Tips
Tool Selection
To achieve the purpose you need, please make sure to use tools with short cutting edges as much as possible. Long cutting edges or tool bodies can cause vibration and misalignment during machining, leading to tool damage and affecting the quality of machining. We recommend using a tool with a larger shank diameter.
Tool operation
(1) Woodworking milling cutters are designed specifically for portable and desktop woodworking carving machines and cannot be used on equipment such as electric drills and drilling machines.
(2) Cutting tools can produce smooth surfaces for hardwood, cork, synthetic board and other wood processing, but it is necessary to avoid processing metal materials such as copper and iron, as well as non wood materials such as sand and stone.
(3) It is necessary to use a jacket of appropriate size, as the jacket with severe wear, insufficient roundness, and taper in the hole cannot provide sufficient tightening force, which can cause vibration or breakage of the tool handle and flying off.
(4) Don't assume that the new jacket is always safe and reliable. When uneven contact marks or grooves are found on the tool handle after clamping the tool, it indicates slip and changes in the inner hole of the jacket. Therefore, the jacket should be replaced immediately to avoid accidents
(5) After the tool is clamped, if any jumping phenomenon occurs during operation, the machine should be stopped immediately and the clamping should be repeated several times to ensu